|
Observation and Perspective
|
| Ride Stats |
|
Distance:
18.72 miles
|
Time: 01:05:12
|
Max Speed:
26.15 mph
|
|
Avg Speed:
17.23 mph
|
Temp:
Min: 62
Max: 75
|
Category: general: leisure -
solo
|
|
Route:
(ATB) Std
|
Weight:
241
|
Altitude Gain:
406 ft
|
|
Avg Power: 0 W
|
Calories Burned: 0
|
Avg HR: 0 bpm
|
|
Terrain: Road: Flat
|
Bike: Juiced CCX Road
|
Club: team bikejournal |
| Weather Conditions: high clouds and a chilly NNW wind; cooler at the lake; |
|
The battery capacity on the CCX is remarkable. The 52-volt 19 Ah, somewhat ungainly 13# battery, allows for greater rider versatility for negotiating speed and distance. There is plenty of capacity for hills encountered along a typical commute.
On this 18.72 mile ride, the 58# CCX enabled my 239# physique to negotiate the ride at 17.2 mph in "ECO" mode, -with little drop in battery voltage. The readout on the display showed 55.2 volts remaining, -a use of 2.6 volts.
https://connect.garmin.com/modern/activity/3688511145
Useful battery capacity boils down to an equation involving Rider effort: (Rider-vs-Battery output).
Any size "Ah capacity" of a battery will power an ebike adequately until it runs low. Ultimately, a 13 Ah battery will run out of useful energy before a 19 Ah, 52-volt monster -like on the CCX. So battery size, along with rider effort, are significant considerations for powering an ebike on a long ride.
Also relating to energy use, is steepness/grade along a route, as well as the distance. Other factors on battery usage are wind and rider weight, as well as battery voltage. Another significant factor to consider is system voltage. A higher voltage system can supply more power to the motor. Finally, if pedaling is not a desired activity for negotiating up a hill, -then I guess one could try walking.
0 member views | 6395 total views
report problem |
|
|
|
| My Recent Threads |
11/25 - Ebikes
11/11 - Trouble Renewing membership
12/22 - Status listing is inorrect
|
|
more...
