Observation and Perspective   
 Ride Stats
Distance: 2.04 miles Time: 00:07:27 Max Speed: 32.80 mph
Avg Speed: 16.43 mph Temp: Avg: 70
Category: general: testing - solo
Route: (ATB) Std Weight: 234 Altitude Gain: 0 ft
Avg Power: 0 W Calories Burned: 0 Avg HR: 0 bpm
Terrain: Road: Flat Bike:  Juiced CCX Road Club: team bikejournal
Weather Conditions: Sunny, Blustery winds.
Navigate by: blog entry | ride entry | any entry
<< Prev Blog  Sunday, March 6, 2022  Next Blog >>
 Replaced the Battery Upper Interface on my CCX today!
I Remembered the replacement fix Bob Davis made to his CCX controller. Bob noticed attachment holes for two long screws on the upper battery interface, along with a shorter screw that attaches the bracket to the downtube. On the factory installation, only one long screw attached the upper battery bracket to the controller -along with the shorter screw that anchors the interface bracket to the downtube. I noticed the same situation with my CCX bracket. I believe this is done purposefully in the manufacturing process.

When finally replacing my cracked upper battery interface bracket today, I noted the V3 repair bracket kit only came with two screws, a long screw, and a shorter screw. The longer screw attaches the interface bracket to the controller (the hole for a second long screw is there). The shorter screw attaches the upper interface bracket to the downtube. The original long screw, and a replacement screw, enable installing the new interface using 2 long screws. I decided against that and installed the new interface bracket using only one long screw (like the original set-up).

While positioning the replacement bracket, I noticed the short screw bracket hole had a misalignment with the tapped hole in the downtube. So, I needed to file an edge of the new bracket to enable proper seating in the downtube position. This misalignment was the probable stress that caused the original upper interface bracket to crack apart.

An interesting note here is the original upper interface, which I had patched with Shoe Goo, is still intact! So, I am keeping it as a backup should I need a future fix.
xxxxxxxxxxxxxxxxxxxxxxxx
As the temperature reached 70° and the winds were toppling some dead wood and pine trees, I decided on an abbreviated test ride. It was gusty as all blow-over!
Once home safely, the very significant howling wind and creaking roof rafters sound ominous at times while I write now at my desk. The roadway is filling with branches and other debris. Directly across from our house, a tree on the edge of the ravine crashed into the guard rail just now cutting off traffic on the roadway. I am very glad to have curtailed my test run before the wind gusts peaked!



0 member views | 4796 total views          report problem |
 
 My Blog Calendar
<<<Mar 2022>>>
MTWTFSS
  1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30 31      
 My Recent Blogs
10/31 - A hi-output recovery ride..
10/30 - Engine Block Silhouette r..
10/23 - A "Corp Ride"
10/20 - Met Another Juiced RCs Ri..
10/12 - Easy Saturday Touring
 My Recent Threads
11/25 - Ebikes
11/11 - Trouble Renewing membership
12/22 - Status listing is inorrect
 My Profile
  bikerjohn click to learn more about premier membership

click to enlarge
view my journal
Lifetime: 68,031 mi
Member No. 16403
Member since: Aug 2006
Home: Spencerport, NY 
 Juiced CCX
Road bike
The "Corps of Codgers" click to learn more about premier membership
 My Favorite Blogs  (find more bloggers)
chipg5: chipg5
karcod: karcod
KrateKraig: Bicycle Music
Slo_Joe: Slo Joe "Cog..

The views expressed here are those of this author only and do not necessarily represent the views of, and should not be attributed to, bikejournal.com's owners. All blogs must follow the terms set forth in the blog agreement. Report any problems to the web administrator.
Copyright © 2001-2024 bikejournal.com  |  All rights reserved